Publicité
Problem
Possible cause
Water temperature is
higher than allowed
System is not
operating with proper
concentrate pressure
and flow rate
Water quality
High
does not meet
permeate
requirements
conductivity
Damaged brine seal
or membrane adapter
O-ring
Fouled or damaged
membranes
Other
Water temperature is
lower than allowed
System is not
Low permeate
operating with proper
flow rate
concentrate pressure
and flow rate
Fouled membranes
Other
This manual is the intellectual property of Ecosoft. Copying and reprinting is prohibited. © 2017
INSTRUCTION MANUAL ECOSOFT RO SYSTEM MINI (MO-6500, MO-12000, MO-24000)
Test temperature of feed water and check that it
conforms with requirements in chapter 2
Write down readings on pressure gauges and rotameters
and contact your dealer's product support
Check that the water analysis conforms with
requirements in chapter 2
Contact your dealer's product support
Replace or chemical clean the membrane
Contact your dealer's product support
Test temperature of feed water and check that it
conforms with requirements in chapter 2
Write down readings on pressure gauges and rotameters
and contact your dealer's product support
Carry out chemical cleaning, contact your dealer's
product support if membranes get fouled too often
Contact your dealer's product support
Corrective action
13
Publicité
