Télécharger Imprimer la page

Mac allister MCI1007RBM Mode D'emploi page 6

Publicité

• Periodically visually inspect to see that the blades, blade bolts
and cutter assembly are not worn or damaged. Replace worn or
damaged blades and bolts in sets to preserve balance.
• On multi-spindle machines, take care as rotating one blade can
cause other blades to rotate.
Operation
01 General
• Do not allow children to be in the vicinity or play with the machine
when it is operating.
• Never operate the machine with defective guards, or without
safety devices in place, or if the cord is damaged or worn.
• Do not overreach and to keep the balance at all times, and always
be sure of the footing on slopes and to walk, never run while
operating the machine or its peripherals.
• Always wear substantial footwear and long trousers while
operating the machine.
• Do not connect a damaged cord to the supply or touch a
damaged cord before it is disconnected from the supply for the
reason that damaged cords can lead to contact with live parts.
• Keep extension cords away from moving hazardous parts to avoid
damage to the cords which can lead to contact with live parts.
• Do not put hands or feet near or under rotating parts.
• Never pick up or carry a machine while the motor is running.
• Remove (or Operate) the disabling device from the machine
• before clearing a blockage;
• before checking, cleaning or working on the machine.
• after striking a foreign object to inspect the machine for
damage;
• if the machine starts to vibrate abnormally, and to check for
damage before restarting.
• Remove (or operate) the disabling device from the machine in
case of accident or breakdown before checking and clearing.
• Avoid using the machine and its peripherals in bad weather
conditions especially when there is a risk of lightning.
5059340856001_MNL_EN_V07.indd 6
5059340856001_MNL_EN_V07.indd 6
6
08/01/2024 12:40:02 pm
08/01/2024 12:40:02 pm

Publicité

loading