Publicité
•
Connect the boundary wire (19) properly to the charging station (12):
1. Connect the starting end of the boundary wire (19) to the left (black) boundary wire terminal F (front) (16).
2. Position the boundary wire (19) under the middle of the charging station (12).
3. Connect the other end to the right (red) boundary wire terminal B (back) (15) (Fig. 21).
•
To connect the boundary wire (19) to the boundary wire terminals (15/16), push down the red and black
levers to expose the terminals and insert the twisted wire ends into them (Fig. 22). Release the levers to
clamp the wires securely in place.
5059340856001_MNL_EN_V07.indd 23
5059340856001_MNL_EN_V07.indd 23
Connector "F" (black)
Connector "B" (red)
Fig. 21
16
Fig. 22
15
23
08/01/2024 12:40:06 pm
08/01/2024 12:40:06 pm
Publicité
