Publicité
03 Laying out the boundary wire
CAUTION! Ensure that the boundary wire (19) is placed away from other cables,
irrigation systems, or underground utilities to prevent tangling or interference.
CAUTION! Place barriers of minimum 15 cm in height between the boundary
wire (19) and certain areas such as water bodies, slopes, precipices, or public
roads, preventing the machine from unintentionally crossing the boundary and
entering these areas.
NOTE: The machine mows in randomized navigation patterns within the chosen
boundary area, ensuring comprehensive coverage.
NOTE: The mowing area is defined by installing the boundary wire (19). Ensure
that boundary wire (19) forms one complete loop with its ends fitted into the
boundary wire terminals (15/16) at the rear of the charging station (12).
NOTE: The provided boundary wire connectors (24) are intended for repair
purposes.
•
Unroll the boundary wire (19) and straighten it out, removing any kinks or tangles (Fig. 16).
•
Lay the boundary wire (19) along the planned path, following the perimeter of the mowing area.
•
Ensure that the boundary wire (19) avoids sharp bends or tight corners. It is generally more suitable to
have gradual curves or smooth turns (Fig. 17).
5059340856001_MNL_EN_V07.indd 21
5059340856001_MNL_EN_V07.indd 21
Fig. 16
Fig. 17
21
08/01/2024 12:40:05 pm
08/01/2024 12:40:05 pm
Publicité
