Publicité
Safety devices
DANGER! Risk of injury! The machine must only be put into operation if no
faults are found. If any sensor is found to be malfunctioning or if the STOP
button (1) or main power switch key (6) is defective, do not use the machine and
have it repaired or replaced by a qualified professional.
WARNING! Do not make any adjustments to the safety devices.
01 STOP button
The STOP button (1) (Fig. 26) serves as an override mechanism in case of emergencies or unexpected
situation. When the STOP button (1) is pressed, it disables all controls, cuts off power to the motor, and
brings all moving parts to complete a stop.
02 Lift and tilt sensor
The lift and tilt sensor detects when the machine is lifted off the ground or tilted at an angle. When the lift
and tilt sensor is triggered, the machine stops operating and beeps continuously.
03 Obstacle detection sensor
The obstacle detection sensors detect obstacles in the machine's path, such as trees, furniture, or other
objects. Once an obstacle is detected, the machine either stops and changes direction, or navigates around
the obstacle, preventing collisions.
04 Boundary wire sensors
The boundary wire sensors detect the signal emitted by the boundary wire to ensure the machine stays
within the defined mowing area. When these sensors are triggered, the machine stops mowing and then
turns around to the mowing area.
05 Main power switch key
When storing the machine in a public space or during extended periods of non-use, remove the main power
switch key (6) to prevent unauthorized use. The machine without the main power switch key (6) becomes
inoperable until the switch is reinserted. To remove the main power switch key (6), turn it anti-clockwise to
the
position (Fig. 27).
5059340856001_MNL_EN_V07.indd 26
5059340856001_MNL_EN_V07.indd 26
Fig. 26
Fig. 27
26
08/01/2024 12:40:07 pm
08/01/2024 12:40:07 pm
Publicité
