Publicité
01 Main power switch key
The main power switch key (6) is located on the rear of the machine.
Positions
Controls
I position
To switch the machine on
O position
To switch the machine off
To remove this main power switch key (6) to prevent unauthorized use
position
NOTE: Keep the main power switch key (6) in a safe place. The machine without
the main power switch key (6) becomes inoperable until it is reinserted.
02 STOP button
To stop the machine at any time during mowing, press the STOP button (1). The motor comes to a stop.
WARNING! Always wait for all moving parts to come to a complete stop and
switch the machine off using the main power switch key (6) before lifting the
machine or accessing the underside of the machine.
03 Control panel
Buttons
04 Cutting height adjustment knob
Turn the cutting height adjustment knob (3) to set the desired cutting height between 20 mm and 55 mm.
NOTE: If the grass is significantly taller than 55 mm, it is recommended to cut it
to 45 mm or below using an ordinary lawnmower or trimmer.
Always set the machine to a higher cutting height for the initial mowings and
gradually decrease the cutting height with each subsequent mowing until the
desired height is reached.
5059340856001_MNL_EN_V07.indd 28
5059340856001_MNL_EN_V07.indd 28
Controls
Press one of the timer buttons to select the daily working hours.
The recommended working time settings for various lawn sizes:
•
<200 m
lawn: 3 hours
2
•
200 to 300 m
lawn: 6 hours
2
Start the operation. Once the set working time has elapsed, the machine
automatically returns to the charging station (12).
Manually send the machine back to the charging station (12).
Press to confirm each of the setting.
28
08/01/2024 12:40:07 pm
08/01/2024 12:40:07 pm
Publicité
