Publicité
•
Turn the cutting height adjustment knob (3) to set the desired cutting height.
•
Select the desired working time.
•
Press the
button and then the
•
The machine starts the mowing session.
•
Once the set working time has elapsed, the machine automatically returns to the charging station (17) for
a complete charge.
NOTE: The machine will automatically resume working at the same time on the
following days as long as it is not switched off and the power supply remains
uninterrupted.
NOTE: The default signal is S1. Only change the signal when interference
occurs between your machine and a nearby machine from your neighbour.
•
To change the signal, press the signal switch button (17) on the charging station (12) and then dock the
machine properly to the charging station (17) and wait for 5 seconds. The machine changes the signal
automatically (Fig. 28).
Mowing tips
•
Make sure that the lawn is clear of stones, sticks, wire or other objects that could damage the machine
or its motor.
•
Ensure the cutting blades (9) are sharp to achieve clean and healthy cuts. Jagged cuts can lead to
browning or disease in the grass blades.
•
Avoid cutting the grass too short, as it inhibits root system growth and nutrient absorption.
•
Never cut off more than one-third of the total length of the grass for a healthy lawn. In the autumn, lawns
should only be cut as long as there is growth.
•
During the summer or drought periods, raise the cutting height to help the grass withstand stress and
maintain a healthy root system.
•
Avoid mowing during the hottest part of the day, as it can cause additional stress on the grass.
5059340856001_MNL_EN_V07.indd 30
5059340856001_MNL_EN_V07.indd 30
button.
> 10 m
S1
> 0.5 m
> 10 m
Fig. 28
30
S2
08/01/2024 12:40:07 pm
08/01/2024 12:40:07 pm
Publicité
