Publicité
5 - BRAKE MAINTENANCE
• Check the wear status of the brake pads
at regular intervals and replace them when
the braking surfaces reach the limit marked
by the wording "WEAR LIMIT" or if braking
power is in any way insufficient (Fig. 15).
• Periodically check that the brake pads are
about 1 mm from the surface of the rim (Fig.
16). If this is not the case, adjust the distance
WARNING!
using the cable tension adjustment screw (C -
The wear limit
Fig. 17). If this proves insufficient, loosen the
is the bottom
cable securing screw (B - Fig. 17), adjust the
of the grooves.
distance of the pads to the rim, reset the posi-
tion of the cable and secure it again by tighte-
ning the cable retainer screw (B - Fig. 17).
15
C
B
~1 mm
~1 mm
16
17
ENGLISH
29
Publicité
