Publicité
10
• Clamp the pad-holders by tightening the 5 mm Allen screw or Torx T25 screw (A - Fig. 11)
to a torque of 8 Nm (71 in.lbs).
DANGER!
Always ensure that the closed part of the brake
block holder (B) is facing the forward direction as
indicated in figure 12.
Incorrect mounting of the brake block holder may
cause the brake block to slide out of the brake
block holder and cause accidents, physical injury
or even death.
REAR
B
12
26
A
(71 in.lbs)
11
FRONT
B
ENGLISH
8 Nm
Publicité
