Publicité
2.d) Secure firmly the brake to the frame by
tightening the nut (A - Fig. 5) with a torque
wrench to 10 Nm - 89 in.lbs.
WARNING!
A loose nut can cause the brake system to
malfunction resulting in an accident, perso-
nal injury or death.
SUPER RECORD / RECORD VERSION
2.e) If your brakes are fitted with the
adjustment screw (E - Fig. 5), then correct
centering using a 2 mm Allen wrench.
2.f) If your brakes are fitted with the recall
spring tension adjustment screw (F - Fig. 6) you
can adjust the force required to activate the
brakes. To modify the force, tighten or loosen
the Allen screw (2 mm wrench) within the
limits allowed by its travel.
WARNING!
After installing the brakes practice using them in a clear area without traffic. Un-
derstanding how the brake system reacts before using the bicycle in public is im-
portant.
Inadequate use of the bicycle's brake system could cause you to lose control of the
vehicle or fall, which could result in serious injuries.
ENGLISH
5
F
6
10 Nm
(89 in.lbs)
A
E
23
Publicité
