Publicité
User manual
Ensure that the cooling unit is switched off before disconnecting the torch's fluid inlet and outlet hoses.
Coolant is harmful and can irritate the eyes, mucous membranes and skin. Hot liquids can cause burns.
OPTIONAL FILTER KIT FOR TITANIUM 231 AC/DC AND 400 AC/DC
OPTIONAL FLOWMETER KIT FOR TITANIUM 321 AC/DC AND 400 AC/DC
ADDING FEATURES
The manufacturer, GYS, offers a wide range of compatible products for your welding equipment.
To discover them, scan the QR code.
WARRANTY CONDITIONS
The warranty covers any defects or manufacturing faults for two years from the date of purchase (parts and labour)
The warranty does not cover:
• Any other damage caused by transport
• The parts' normal wear and tear (e.g . cables and clamps, etc.).
• Misuse-related incidents (misfeeding, dropping or disassembling the device)
• Environmental failures (pollution, rust and dust, etc.)
Should the appliance malfunction, return it to your distributor together with:
- dated proof of purchase (receipt or invoice, etc.)
- a note explaining the breakdown
Translation of the original
instructions
Dust filter (P.N 046580) with fine filtration: 630 µm (0.63 mm).
Please note that using this filter reduces the welding machine's duty cycle.
The dust filter should be cleaned regularly to avoid the risk of overheating due to blocked air vents.
Unclip and clean with compressed air.
The flowmeter kit (ref. 073395) allows for precise adjustment and control of the gas flow from the torch,
when connected to a gas supply. The gas pressure in the system must be stable and between 2 and 7
bar. The flow rate can be set between 3 and 30 l/min.
TITANIUM
37
Publicité
