Publicité
Using the machine interface
Changing a user profile
Select the user on the left side of the screen and press the push button n°4.
Selecting users
If one or more user profiles are created, the user block displays all of the machine's users.
Select the user of your choice and press
The «Close» feature locks the machine on the user's choice so that no other settings are accessible. This screen
remains the same when the machine is switched on (OFF -> ON switch).
User display
The active avatar and username are displayed at the top left of the screen.
Unlocking code
Each user profile is protected by a personal, four-digit code. The default code will be 0000 if not changed. After failing to
correctly enter your personal code three times, the interface will be blocked and you will be asked for an unlock code.
This code is made up of six digits and cannot be changed. It is: 314159.
Traceability
This welding management interface allows you to track/record every step of the welding operation, bead by bead, during
any industrial operation. This quality-driven approach ensures high post-production welding quality through analysis,
evaluation, reporting and documentation of the recorded welding settings. This feature allows for the accurate and fast
collection and storage of data required under EN ISO 3834. This data can be recovered and exported to a USB stick.
1- Start -
Creating a tracking system
• Personalise the site's name by pressing push button n°3.
• Sampling interval :
- Hold : No recording of current/voltage values (average along the wire) during welding.
- 250 ms, 500 ms, etc. : Recording of the current/voltage values (average along the wire) every «X» milliseconds or
seconds during welding.
• Options - OFF : simple tracking
• Options - ON : full tracking
Pass counter (ON/OFF)
Weld counter (ON/OFF)
Temperature (ON/OFF) : Temperature of the part to be welded at the beginning of the weld bead.
Length (ON/OFF) : Length of the wire (units of measurement are displayed according to the choices made in
Settings/Units of Measurement).
Variable(s): allows you to add additional personalised information (weight, notes, etc.).
Press
to start tracking.
Tracking display
At the top left of the screen, the job name and the bead number are displayed (the bead number goes up automati-
cally and cannot be changed).
Identification - Options ON
At the end of each bead, an identification window appears: Pass N°, Weld N°, Part temperature and/or Bead length.
Validation
Confirmation can be done on the HMI or by pressing the torch's trigger.
Stop -
Stop tracking
To stop tracking during a welding process, the user must return to the Tracking block and select «Stop».
Export
The recovery of this information is done by exporting the data to a USB stick.
The CSV data can be processed with a spreadsheet program (Microsoft Excel®, Calc OpenOffice®, etc).
14
The file name is linked to the machine name and serial number.
to confirm the choice.You will be asked for an unlock code.
Publicité
