Publicité
User manual
RECOMMENDED COMBINATIONS
(mm)
0.3 - 3
2.4 - 6
4 - 8
6.8 - 10
9 - 12
-
0.5 - 3
0.8 - 5
1.5 - 6
1.6 - 11
2 - 15
TIG WELDING MODE (GTAW)
CONNECTIONS AND ADVICE
• TIG welding requires gas shielding (argon).
• Connect the earth clamp to the positive (+) connector. Connect the torch's power cable to the
negative (–) connection as well as to the torch and gas button(s) connections.
• Make sure that the torch is well fitted and that the consumables (vice grip, collar support, diffuser and nozzle) are not worn out.
• The choice of electrode depends on the TIG welding current.
SHARPENING THE ELECTRODE
For optimum performance, it is recommended to use an electrode sharpened in the following way:
d
PROCESS SETTINGS
Parameter settings
Standard
Pulsed
Fast Pulse
Spot welding
-
Tack welding
Multi-Spot
Multi-Tack
AC Mix
Material type
Fe, Al, etc.
Tungsten electrode
1 - 4 mm
diameter
Lift, HF and Touch.
Ignition type
HF
Trigger mode
2T, 4T and 4T LOG
E-TIG
OFF - ON
Hold
Energy
Thermal coefficient
Parameter settings
(advanced)
Accessing certain welding parameters is dependent on the selected display mode: Settings/Display mode: Easy, Expert or Advanced. Refer to the
26
HMI manual.
Translation of the original
instructions
Amps (A)
10 - 80
15 - 100
20 - 120
30 - 200
50 - 300
60 - 400
15 - 90
20 - 150
40 - 200
50 - 350
80 - 450
L
Welding processes
Settings
Synergy
-
-
-
-
-
Electrode Ø (mm)
1
1.6
2
2.4
3.2
4
1.6
2.4
3.2
4
4.8
L = 3 x d for a low current
L = d for a strong current
DC
AC
Wizard
-
Smooth current
-
Pulsed current
-
-
Inaudible pulsed current
-
Smooth tack welding
-
-
Pulsed tack welding
-
Repeated smooth spot welding
-
-
Repeated pulsed tack welding
-
AC/DC current mixing
-
-
-
Choosing the material to be welded
Choosing the electrode's diameter Allows HF ignition
currents and synergies to be refined.
Choosing the ignition type
2T, 4T
Choosing the trigger welding management mode
-
Constant energy welding mode with arc length correction
See «Energy» chapter on the following pages.
HF ignition adjustment
Nozzle Ø (mm)
Argon Flow Rate (L/min)
6.5 / 8
6.5 / 8 / 9.5
8 / 9.5
9.5 / 11
11 / 12.5 / 16
11 / 12.5 / 16 +
6.5 / 8 / 9.5
9.5 / 11
11 / 12.5 / 16
16 / 17.5
16 / 19
TITANIUM
5 - 6
6 - 7
6 - 7
6 - 7
7 - 8
8 - 10
6 - 7
7 - 8
8 - 10
10 - 12
12 - 18
Publicité
