Publicité
EN
6.3 Clear the settings
When should I delete the settings?
• After auto-programming, if you change the position stop, if you change the motor wiring or if you
add a safety edge to the gate.
• If the gate opens at random due to normal wear of the gate.
1
1 - ON
>2s
1 - ON
>2s
1 - ON
>2s
• Press the
button on
the control
electronics for
2 seconds. The
indicator light
comes on.
To clear the settings*
6
7
2
3
• Place the
• Keep button
1 of the
memorised
remote control
remote control
against
depressed until
the control
the indicator
electronics.
light
x2
• Keep button 2 of
the remote control
depressed until the
x2
"RESET" indicator
light comes on.
4
x2
• Press button 1
on the remote
control twice.
flashes.
To clear the settings* and the
memorised remote controls/control
points
6
The indicator light
flashes twice (see
page 15 to run a self-learning procedure).
*Gate travel, deactivation of the settings, ...
EN - FREEVIA installation and operating guide - SOMFY
Repairs
1 - ON
>2s
5
x2
The "RESET"
indicator light
flashes.
• Keep button 2 of
the remote control
depressed until the all
the indicator lights
come on.
6
x2
31
Publicité
