Publicité
Installation
1
▶ Fastening the rack b1
• The rack and pinion must be
fastened to the gate brace.
• Use suitable screws for the
material of your gate (see page
8).
• Never lubricate the motor rack
and pinion.
1
• Open the gate completely.
• Use the pencil provided to mark the position of the rack.
If the pencil makes a mark above the brace, the
rack provided us not suitable for your gate.
A low-fastening rack (ref. 2401294) must be used.
Please contact Somfy.
• With one hand, hold the pencil in the notches provided
on the motor and with the other hand, slide the gate to
mark the fastening height of the rack.
10
EN - FREEVIA installation and operating guide - SOMFY
• By aligning the top of the rack with
the line drawn in pencil, the required
2 mm clearance between the rack
and pinion is obtained.
• If the fastening points are too close
to the edge of the brace: fasten the
rack at the centre of the oblong
holes.
Rack fastening mark
2
• Position the rack by aligning the top of
the rack with the line drawn in pencil.
• Fasten the first element of the rack at
the top of the oblong holes, beginning at
the left-hand side of the gate.
• Install and fasten the other items in the
same way, interlocking them with the
others.
Publicité
