4 ADVANCED PARAMETER SETTINGS
4.1 Pedestrian opening
▶ Pedestrian opening operation
Pressing the remote control button programmed to open the pedestrian opening causes the date to
open about 1 metre. Pressing it again causes the gate to close.
▶ Activating the pedestrian opening
Button 1 on 2- or 4-button remote controls cannot be programmed to control pedestrian opening.
See "Programming the remote controls", pages 27-29, for more information.
1
• Press on the
the control electronics for 2
seconds.
The indicator light
on.
Move away from the control electronics to test the pedestrian opening.
▶ Deactivating the pedestrian opening
Repeat the "Activate pedestrian opening" procedure using the button for which the pedestrian opening
must be deactivated. The indicator light
deactivated on this button.
22
EN - FREEVIA installation and operating guide - SOMFY
1m
2
>2s
• Place the remote control
button of
against the control electronics.
comes
<0,5 s
comes on then goes out. The pedestrian opening is
1m
3
• Press button 2 on the remote
control.
The "RADIO" and
indicator
lights come on then go out.
The pedestrian opening is
activated on this button.