Samson 3241 Notice De Montage Et De Mise En Service page 93

Declaration of Conformity of Final Machinery
in accordance with Schedule 2 Part 2 Annex II, section 1.A. of the Directive 2008 No. 1597
Supply of Machinery (Safety) Regulations 2008
For the following products:
Types 3241-1/-7 Pneumatic Control Valves consisting of the Type 3241 Valve and
Type 3271/Type 3277 Pneumatic Actuator
We hereby declare that the machinery mentioned above complies with all applicable requirements
stipulated in Directive 2008 No. 1597 Supply of Machinery (Safety) Regulations 2008.
For product descriptions of the valve and actuator, refer to:
Valve accessories (e.g. positioners, limit switches, solenoid valves, lock-up valves, supply pressure
regulators, volume boosters and quick exhaust valves) are classified as machinery components in this
declaration of conformity. Machinery components can be mounted onto the above specified final ma-
chinery if they comply with the specifications and properties defined by SAMSON Manual H 02 "Ap-
propriate Machinery Components for SAMSON Pneumatic Control Valves with a Declaration of Con-
formity of Final Machinery".
Referenced technical standards and/or specifications:
- VCI, VDMA, VGB: "Leitfaden Maschinenrichtlinie (2006/42/EG) – Bedeutung für Armaturen,
Mai 2018" [German only]
VCI, VDMA, VGB: "Zusatzdokument zum „Leitfaden Maschinenrichtlinie (2006/42/EG) –
-
Bedeutung für Armaturen vom Mai 2018" [German only], based on
DIN EN ISO 12100:2011-03
Comment:
Information on residual risks of the machinery can be found in the mounting and operating instructions
of the valve and actuator as well as in the referenced documents listed in the mounting and operating
instructions.
Persons authorized to compile the technical file:
SAMSON AG, Weismüllerstraße 3, 60314 Frankfurt am Main, Germany
Frankfurt am Main, 13 December 2021
i.V. Stephan Giesen
Director
Product Management
Classification: Public · SAMSON AKTIENGESELLSCHAFT · Weismuellerstrasse 3 · 60314 Frankfurt am Main, Germany
EB 8015 FR
- Type 3241 Valve (DIN): Mounting and Operating Instructions EB 8015
- Type 3241 Valve (ANSI): Mounting and Operating Instructions EB 8012
- Types 3271 and 3277 Actuators: Mounting and Operating Instructions EB 8310-X
i.V. Peter Scheermesser
Director
Product Life Cycle Management and ETO
Development for Valves and Actuators
Revision 00
Page 1 of 1
14-13