Publicité
Bas Netzteil
und die Tellermotorverstarker
sind auf der Leistungsplatte ent-
halten
(Nr. 627 in der Explosionszeichnung);
die anderen elektranischen
Kompo-
nenten befinden sich zum ordéGte Teil auf der Steuerplatte
(610).
the auto-stop sensor signals high angular velocity, caused either by the re-
cord lead-out
groove or by sudden jarring of the tone arm.
The auto-stop
cir-
cuit then sends a signal via the mode switch to the
% or the Z lead, thus
lifting the tone arm.
Three motor-and-lift buttons remain operative at all
times,
thus enabling interruption and resumption of play at wil). Additional
circuitry maintains
the motor running when the tone arm is lowered upon or
raised
from the record surface,
thus eliminating
the possibility
of "wow"
effects.
The mode switch determines
the operating states of the control
cir-
cuitry when the TD 126 is first turned on and when the auto-stop circuit
raises the tone arm, as detailed in the instruction manual.
The power supply and the platter motor amplifiers are contained on the power
board (No. 627 in the exploded diagramm), whereas most of the other electronic
components are located on the control
board (610).
=
19-
Publicité
