Weighing With Tare; Automatic Taring - Mettler Toledo ICS241 Mode D'emploi

30232251A ICS241

2.4 Weighing with tare

2.4.1 Taring
➜ Place an empty container on the scale and press
The scale is set to zero and the
The tare weight remains stored until it is cleared.
2.4.2 Clearing the tare
➜ Press .
The symbol and the gross weight appear on the display.
If the symbol is displayed, the automatic clearing of the tare weight function is activated
in the Scale –> Tare menu and the tare weight is automatically cleared as soon as
the scale is unloaded.
2.4.3 Automatically clearing the tare
The tare weight is automatically cleared when the scale is unloaded.
Prerequisite
9 The symbol is displayed, the automatic clearing of the tare weight function is
activated in the Scale –> Tare menu.

2.4.4 Automatic taring

If you place a weight on an empty scale, the scale tares automatically and the
is displayed.
Prerequisite
9 The symbol is displayed, the automatic clearing of the tare weight function is
activated in the Scale –> Tare menu.
The weight can be tared automatically when packaging material is heavier than 9d.
2.4.5 Chain taring
With this function it is possible to tare several times if, e.g., cardboard is placed between
individual layers in a container.
Prerequisite
9 The Chain tare tare function is activated in the Scale –> Tare menu.
1. Place the first container or packaging material on the scale and press
The packaging weight is automatically saved as tare weight, the scale is set to zero
and the symbol is displayed.
2. Weigh the weighing sample and read/print the result.
3. Place the second container or packaging material on the scale and press
The total weight on the scale is saved as new tare weight.
The scale is set to zero.
4. Weigh the weighing sample in the second container and read/print the result.
5. Repeat steps 3 and 4 for the further containers.
.
symbol is displayed.
symbol
.
again.
11
Basic operation