Menu Settings; Operating The Menu - Mettler Toledo ICS241 Mode D'emploi

Operator menu
Supervisor menu
26

Menu settings

4 Menu settings
In the menu settings can be changed and functions can be activated. This enables
adaptation to individual weighing requirements.
The menu consists of the following 5 main blocks containing various submenus on
several levels.
Scale see section 4.2, page 29
Application see section 4.3, page 32
Terminal see section 4.4, page 35
Communication see section 4.5, page 38
Maintenance see section 4.6, page 43
4.1

Operating the menu

4.1.1 Calling up the menu and entering the password
The menu has 2 different operating levels: operator and supervisor. The supervisor level
can be protected by a password. When the device is delivered, both levels are accessible
without a password.
1. Press and hold
2. Press again.
The Terminal menu is displayed. Not all submenus are accessible.
1. Press and hold
2. Enter the password and confirm with
The first menu item Scale is highlighted.
When the device is delivered, no supervisor password is set. Therefore, confirm the
password inquiry when you call up the menu for the first time.
If no password is entered for a few seconds, the scale returns to weighing mode.
Emergency password for supervisor access to the menu
If a password has been set for supervisor access to the menu and you have forgotten it,
you can still enter the menu:
1. Press and hold
2. Press 3 times and confirm with
until Enter code is displayed.
until Enter code is displayed.
.
until Enter code is displayed.
.
ICS241 30232251A