Mettler Toledo ICS241 Mode D'emploi page 7

30232251A ICS241
Symbols and info line
In the symbols and info line the following information can be displayed:
Symbol Information
Weight below
minimum weight
Automatic taring
Automatic clearing
of the tare weight
>0<
Center of zero
indication
Checkweighing to
zero
Take away mode
Auto sampling
Auto clear APW
(average piece
weight)
APW (average piece
weight) optimization
Auto totalize
Device information
ICS241 offers the possibility to configure the following device information to identify the
device according to your company's needs:
• Device identifier
• Device location
In addition, the device name provides the complete type information provided "ex factory",
e.g., ICS241-03002.
This device information can be used as follows:
• Displayed in the auxiliary line of the display
• Displayed via .
• Printed/transferred together with the weight value
➜ Ask your METTLER TOLEDO service technician to configure device identifier and device
location according to your specific requirements.
Remark
MinWeigh must be activated in the menu.
Auto Tare must be activated in the menu.
Auto Clear Tare must be activated in the
menu.
Availability depends on local Weights and
Measures regulations.
To zero must be assigned to a soft key in the
menu.
Take away must be assigned to a soft key in
the menu.
Auto sampling must be activated in the menu.
must be activated in the menu.
Auto clear APW
APW optimization must be activated in the
menu.
Auto totalize must be activated in the menu.
7
General information