Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
EN
7 Roller
8 Suction opening
9 UV-C lamp cover
10 Safety switch, right
11 Vibration head
12 UV-C lamp (under the
cover)
13 Safety switch, left
Charging Up the Battery
PLEASE NOTE!
■
It is essential that you charge up the battery fully before you fi rst use the de-
vice in order to achieve the maximum charging capacity. If the battery is fully
discharged during use, it must be fully charged up again before it is next used.
•
First plug the barrel connector of the mains adapter into the connecting socket (1) on
the motor unit (4) and then connect the mains adapter to a plug socket. The operating
lamp in the On / Off switch (2) fl ashes. The battery is being charged.
•
If the operating lamp is permanently lit, the battery is fully charged.
•
First disconnect the mains adapter from the mains power and then disconnect the
barrel connector from the motor unit.
Safety Devices
The device has two safety switches (10, 13). The UV-C lamp (12) only switches on if both
safety switches are pressed into the motor unit (4) (automatic switch-off function of the
UV-C lamp deactivated). This happens automatically when the device is placed on a fl at
surface. If the safety switches lose contact with the surface below, the automatic switch-
off function is activated and the UV-C lamp stops being lit (automatic switch-off function
of the UV-C lamp activated).
Tips and Notes
•
Always clean mattresses on both sides.
•
We recommend cleaning new mattresses once a month. Older mattresses
should initially be cleaned every day for a week. We then recommend
cleaning them once a month.
18
13
12
11
7
8
9
10
Publicité
Chapitres
Table des Matières
Dépannage
