Technical Data; Disposal - Cleanmaxx SV1801 Mode D'emploi

Problem
The operating lamp (2)
does not light up when the
device is connected to the
mains power.
The UV-C lamp (12) does
not light up.
Unusual odour

Technical Data

Article number:
ID operating instructions: Z 03416_03807 M DS V1.2 1019
Device
Model number:
Voltage supply:
Power:
Battery
Charge time:
Operating time:
Mains adapter
Model number:
Input:
Output:
Protection class:

Disposal

PLEASE NOTE!
■ The UV-C lamp should be removed prior to disposal of the device and disposed of
separately from the device. Notes on how to remove the UV-C lamp can be found in
the "Cleaning and Storage" chapter – "Cleaning the UV-C Lamp".
Dispose of the packaging material in an environmentally friendly manner so that
it can be recycled.
21
Possible cause
The mains adapter is not
inserted in the plug socket
correctly or the barrel con-
nector is not inserted in the
connecting socket (1) on
the device correctly.
The plug socket is defec-
tive.
The automatic switch-off
function of the UV-C lamp
has been activated.
The device is being used
for the fi rst time.
03416 (blue), 03807 (red)
SV1801
14.8 V DC, 2200 mAh
100 W
approx. 4 – 5 hours
approx. 20 – 30 minutes
(when battery is fully charged)
TYGSDC1800500
100 – 240 V~ 50 / 60 Hz
18 V DC, 500 mA
II
Solution
Correct the fi t.
Try another plug socket.
Check the safety switches.
A new odour is normal
when the device is used for
the fi rst time; it disappears
after a while.
EN