Publicité
T.
Function
1
ON/OFF of the hob / hob extractor fan
Selection of the cooking zones / Cooking zone dis-
2
play
Increase/decrease cooking power level and extrac-
3
tion speed (power)
Display the cooking power level and extraction
speed (power)
4
Activate "STAND ALONE" timer
Display : "STAND ALONE" timer / Cooking Zones
Timer.
Increase/Decrease "STAND ALONE" Timer time /
5
Cooking Zones timer
6
Activation of Cooking Zones Timer
Indicator of Cooking Zones Timer active
7
Automatic Heat Up Activation.
Temperature Manager activation (Warming Func-
8
tion)
9
Pause
10
Key Lock
11
Indicator Extractor active
Activation of Filter Saturation Indicator
12
Extractor Selection/Activation
Extractor Display
Display of Carbon/ceramic filter - Grease filter satur-
ation
13
Reset Filter Saturation
14
Activation of extractor automatic function
THINGS TO KNOW BEFORE STARTING
All functions of this hob are designed to comply with the
most stringent safety regulations. For this reason:
• Some functions will not be activated, or will be
automatically deactivated, in the absence of pots on
the burners or when they are poorly positioned.
• In other cases the activated functions will be automatically
deactivated after a few seconds, if the specific function
requires a further setting that has not been selected (e.g.:
"Turning the hob on" without "Selecting the cooking zone"
and the "Operating temperature", or the "Lock Function" or
the "Timer" function).
Wait for the display to turn off before approaching the
cooking zone.
Please note! In the case (for example) of prolonged use,
the cooking zone may not immediately shut down because
it is in the cooling phase; the symbol
cooking zone display to indicate that this phase is under
way. Wait for the display to turn off before approaching the
cooking zone.
COOKING ZONE DISPLAY
The following is shown on the cooking zone displays:
Function
Cooking zone on
Power Level
Residual Heat Indicator
Pot Detector
Bridge Zone Function active
Temperature Manager Function active
Pause function
Automatic Heat UP function
CHARACTERISTICS OF THE HOB
● Safe Activation
The product is activated only in the presence of pots on the
cooking zone: the heating process does not start or is
interrupted if there are no pots, or if these are removed.
● Pot Detector
The product automatically detects the presence of pots on
the cooking zones.
● Safety Shut Down
For safety reasons, each cooking zone has a maximum
operating time, which depends on the power level set.
● Residual Heat Indicator
When switching off one or more cooking zones, the
residual heat is indicated with a specific visual signal on the
display of the corresponding zone by the symbol
USING THE HOB
Note: Before activating any functions, the desired zone
must be activated
● Power-on
Briefly press (touch)
the symbol
available functions will become visible for a few seconds,
after which only the main ones will remain active; the other
ones can be used, and will be activated, later, while using
the device.
IMPORTANT:
illuminated with light intensity, which will become
more intense only when they are activated.
Press again to turn off
will appear on the
17
ON/OFF (1) hob / extractor fan:
lights up; If you continue to press: all the
all the available functions will be
Value
.
Publicité
