GB
MT
As soon as the tree begins
to fall, pull out the saw from
the section, stop the motor,
place the chainsaw down
and leave the workplace us-
ing the withdrawal path.
Pay attention to falling
branches and do not stumble.
Connecting the device
to the Parkside app
Only Smart Performance batteries
can be connected to the Parkside
app. The device connects to the app via
the battery.
1.InsertSmart Performancebatteries
16) intothedevice.Youwillhear
(
them click into place.
2. Press the button for the charge level indi-
26)
cator (
The device is now activated and the
SmartLED
3.EnableBluetooth
4. Open the Parkside app.
5. Select
.
Ifyouhavealreadyconnected
the Smart Performance battery
you are using the device with to the
app,youwillfindthedeviceinthelist
of connected devices.
6. Select the device from the list.
If it is not available, connect the de-
vice to the app as follows:
Add device"or,ifyouhave
1. Select "
alreadypaireddevices/batteries,the
at the top right.
2. Follow the instructions in the app. The
app scans the surroundings for available
devices.
56
28)flashes(briefly).
(
on your smartphone.
®
3. Select the device you wish to add.
4. You can rename the device if necessary.
Confirmthesuccessfulconnectionwith
"Done" or select "Add more devices"
directly.
The device is now listed under
connected devices and can be selected.
Upgradingthefirmwarecanchange
the features of the app.
Features of the app
Selecting the device in the list under
will take you to the overview page.
For more detailed information on in-
dividualpoints,selectthe
Privacy policy
Youcanfindthecomplete"
Policy" at
.
Disconnecting the device and
deleting data from the app
Go to
to select the device you want
to remove and whose data you want to
delete,pressandholdtheselectionand
swipe from the right to the left edge of the
screen
.
Problems with the app? –
FAQ
1. Select
.
FrequentlyAskedQuestions.
2. Select
H ereyouwillfindfrequentlyasked
questions and the corresponding
answers.
in your
.
Privacy