Parkside Performance 445977 2307 Traduction Des Instructions D'origine page 51

shift­the­brake­arm­(5)­back­against­the­
front­grip­(4).
4.­ Hold­the­chainsaw­firmly­with­both­
hands,­with­the­right­hand­on­the­rear­
grip­(1)­and­the­left­hand­on­the­front­
handle­(4).­Thumb­and­finger­must­
close securely over the handles.
5.­ To­activate­the­device,­first­press­the­
button for the charge level indicator
26).­
(
6.­ To­start­the­device,­push­the­switch­lock­
(3)­forwards­with­the­right­thumb­and­
press­the­on/off­switch­(2).­Release­the­
switch­lock­(3).
7. The power saw switches off when you
release­the­On/Off­switch­(2)­again.­
Switching for continuous running is not
possible.
Overload indication
In­case­of­overload,­the­red­and­yellow­
LEDs­of­the­charge­level­indicator­(
flash.
Battery charge level
indicator
Press the button for the charge
status display (
the control panel light up.
The charge level of the batteries is indi-
cated by illumination of the corresponding
LED­lights­of­the­battery­charge­level­indi-
24).
cator (
3 LEDs illuminated (red, orange and green):
Battery charged
2 LEDs illuminated (red and orange):
Battery partially charged
1 LED illuminated (red):
Battery needs to be charged
24)­
26).­The­LEDs­on­
Changing the chain
speed
By pressing the button for chain speed se-
lection­(27)­you­can­switch­between­chain­
speeds 15 and 20 m/s.
You can see at which chain speed the de-
vice is currently working by illumination of
Levels 1 or 2 on the chain speed indicator
(25).
Level 1: 15 m/s
­ At­Level­2,­the­chain­speed­is­25­
m/s if you use the device with two
8 Ah performance batteries "Smart
PAPS 208 A1".
Checking the chain
brake
The motor cannot be turned on if the
chain brake has engaged. Do not
employ the chain brake in order to
start the chainsaw or to switch it off.
Method 1:
1.­ Place­the­­chainsaw­onto­a­solid,­flat­
surface.­It­must­not­contact­any­objects.
2.­ Operate­the­chain­brake­lever­(5).
3.­ Insert­the­batteries­(16)­into­the­device.­
A warning tone sounds. A warning
tone sounds.
The chain brake functions.
4. Loosen the chain brake.
Method 2:
1.­ Place­the­­chainsaw­onto­a­solid,­flat­
surface.­It­must­not­contact­any­objects.
2.­ Operate­the­chain­brake­lever­(5).
3.­ Hold­the­chainsaw­firmly­with­both­
hands,­with­the­right­hand­on­the­rear­
1)­and­the­left­hand­on­the­
handle (
front handle (
GB MT
Level 2: 20 m/s
4).­Thumb­and­finger­
51