Publicité
Auto Adjustment:
This function allows you to adjust the emission from the product's internal measurement gauge. This procedure takes several tens of seconds and shall be
carried out for the 2 gauges (400 Ohm and 3500 Ohm).
Emission :
This function allows you to adjust the emission more finely according to the output connector assembly used and the transmitter's measurement current. This
adjustment is to be carried out for the 2 gauges (400 Ohm and 3500 Ohm).
Calibration date:
Should the device undergo calibration, you can enter the date of this calibration and the certificate reference number.
E.5
"About the instrument" menu
In the Configuration/Setup/About menu, you can find out:
•
The instrument part number
•
The Serial number
•
The software version
•
The name of the company
E
71/71
Publicité
