Publicité
•
Using the navigation keys (↑ ↑ ↑ ↑ and ↓ ↓ ↓ ↓ ), select the value that needs to be emitted.
•
Confirm using the VAL key.
Voltage/resistance or temperature generation/synthesizer?
•
Press the F2 key to display the edit menu.
•
Using the navigation keys (↑ ↑ ↑ ↑ and ↑ ↑ ↑ ↑ ), choose the Synthesiser mode and confirm (VAL key).
The values emitted are those programmed in the CONFIGURATION/Synthesiser menu (see the chapter entitled Related functions).
•
Using the navigation key (↑ ↑ ↑ ↑ ), start the automatic increases phase (following the parameters programmed in the CONFIGURATION/Synthesiser
menu).
•
Using the navigation key (↓ ↓ ↓ ↓ ), you can decrease automatically starting from the max. programmed voltage (or temperature).
•
Using the navigation key ( ), you can increase manually the voltage (or temperature) emitted (following the parameters programmed in the
CONFIGURATION/Synthesiser menu).
•
Using the navigation key ( ), you can decrease manually the voltage emitted starting from the max. programmed voltage (or temperature).
The Hold key allows you to stop generating or to resume it
You can resume the generation of the ramp in step-by-step mode by pressing the navigation keys ( and ) or in automatic generation using the navigation
keys ( and ).
The configuration of the parameters for the ramps and default values is explained in the chapter entitled "Related Functions".
Values to be
emitted
C
55/55
Publicité
