Publicité
A.
G
ENERAL
A.1
Introduction
The TC-TM66XX range is comprised of 5 temperature measurement and/or calibration devices for thermocouples and resistive sensors (compliant with EC
standards, Directive 2004/108/EC). They are especially designed for calibration and maintenance. It makes it possible to measure and to emit electrical
measurements and to simulate temperatures both on site as well as in a laboratory.
The TC-TM66XX range features a large number of related functions which extend its range of application, including:
•
Generation of default values, increases, single or cyclic ramps (for TC6621 and TC6622).
•
Storage of acquisitions and display in the form of tables or trend curves.
•
Use of calibrated sensors with their coefficients of correction
A range of improvements facilitates its operation:
•
Rapid access to all functions.
•
Intuitive user interface.
•
160x160 graphic display
•
Connection via 4 mm safety plugs or a miniature flat plug.
•
Connection via 4 mm safety plugs or miniature flat plugs for thermocouple temperature calibrators, and connection by 4 mm safety plugs or 4-pt
circular connector for resistive sensor temperature calibrators.
•
Power supply via 4 AA batteries or rechargeable batteries with internal charger (Option).
The units are fitted in an elastomer-sheathed ABS case.
A.2
Definition of the range
The range is detailed in the table below:
TC6621
TC6622
TM6602
TM6612
TM6630
A.3
Parts
General characteristics:
•
Portable device powered by 4 AA batteries (pack of Ni-MH storage batteries, 1.7 Ah optional).
•
Hand strap for carrying and use on-site
•
Graphic liquid crystal display: 160 x 160 pixels.
•
Choice of language used for messages and programming of functions, gauges and parameters via 6-key keyboard + 1 navigator.
•
Backlit display accessible via a keyboard key, with the possibility of automatic black-out after a specific programmable period of inactivity.
•
Appearance: ABS case (elastomer-sheathed).
•
Dimensions : 157 mm x 85 mm x 45 mm (without coating).
•
Weight: 306 g without coating.
•
IP54 tightness in compliance with standard EN 60529
Optionals:
Part No.
AV 6909
Protective sheath
AN 6011
Pack of batteries + charger
ER 48519-000
USB cable.
S101D
Capteur ambiant -10°C/+200°C
S102D
Capteur d'immersion rigide
T101, T102, T103
Thermocouple K sensors
A.4
Safety
A.4.1
Compliance with safety standards
The device complies with the applicable standards in force on the subject of electrical safety (EN 61010) as well as on the electromagnetic compatibility of the
electrical measuring instruments (EMC: EN61326).
These instructions for use contain information and warnings which must be observed by the user to protect the latter against the dangers of electricity, to ensure
the safe operation of the device and to protect it against any mishandling which could damage or compromise the safety of use of the device.
Thermocouple
Thermocouple
measurement
emission
X
X
X
X
Name
Resistive
Resistive
sensor
sensor
measurement
simulation
X
X
X
X
A
Publicité
