Publicité
E.
P
ARAMETER SETTINGS
E.1
Contrast adjustment
In the CONFIGURATION/SETUP menu, you can adjust the display contrast.
•
Access this menu using the F1 key.
•
Select the Setup field using the navigation keys (↑ ↑ ↑ ↑ and ↓ ↓ ↓ ↓ ), then confirm.
•
Select the Contrast field using the navigation keys (↑ ↑ ↑ ↑ and ↑ ↑ ↑ ↑ ), then confirm.
•
Using the navigation keys ( and
E.2
Date and time setting
In the CONFIGURATION/SETUP menu, you can set the time and date.
•
Access this menu using the F1 key.
•
Select the Setup field using the navigation keys (↑ ↑ ↑ ↑ and ↑ ↑ ↑ ↑ ), then confirm.
•
Select the Date/Time field using the navigation keys (↑ ↑ ↑ ↑ and ↑ ↑ ↑ ↑ ), then confirm.
•
Use the navigation keys (↑ ↑ ↑ ↑ and ↓ ↓ ↓ ↓ ) to increase the various parameters.
•
Use the navigation keys ( and
•
Press VAL to confirm.
E.3
"Preferences" setting.
E.3.1
Filtering setting.
In the event of noisy measurements, you can filter the latter to make the value displayed on the screen more stable.
•
Access this menu using the F1 key (configuration menu).
•
Select the Setup field using the navigation keys (↑ ↑ ↑ ↑ and ↑ ↑ ↑ ↑ ), then confirm.
•
Select the Preferences field using the navigation keys (↑ ↑ ↑ ↑ and ↑ ↑ ↑ ↑ ), then confirm.
•
Select the Filtering field by pressing the F1 key.
•
Four filtering values are available (OFF, 0.5s, 1s and 2s). Select these values using the navigation keys (↑ ↑ ↑ ↑ and ↓ ↓ ↓ ↓ ).
•
Confirm by pressing the VAL key.
E.3.2
Display resolution setting.
In the CONFIGURATION/SETUP/PREFERENCE menu, you can select the desired display resolution:
•
Access this menu using the F1 key.
•
Select the Setup field using the navigation keys (↑ ↑ ↑ ↑ and ↑ ↑ ↑ ↑ ), then confirm.
•
Select the Preferences field using the navigation keys (↑ ↑ ↑ ↑ and ↑ ↑ ↑ ↑ ), then confirm.
•
Select the Resolution field by pressing the F1 key.
Three types of resolution are available: high (res=1 V), medium (res=10 V) and low (res=100 V).
•
Select this resolution using the navigation keys (↑ ↑ ↑ ↑ and ↑ ↑ ↑ ↑ ).
•
Confirm by pressing the VAL key.
E.3.3
Lighting duration setting.
In the same menu (CONFIGURATION/SETUP/PREFERENCE), you can control the duration of the lighting (manual, 10s or 1min). Press the ON/OFF key
briefly to turn on the lighting for the selected duration (10s or 1min). Press it again briefly to start the timing or to turn off the lighting in the case of the manual
mode.
•
Access this menu using the F1 key.
), increase or decrease the contrast as required.
) to go to the next field.
E
67/67
Publicité
