Publicité
Display burst:
You can display the burst in the form of a table of values or a trend curve.
At this level, it is possible to
- display the trend curve entirely: press the F2 key (GRAPH).
- or place markers so as to display in the form of a graph all the values included between these 2 markers. To do so, press the F2 key (...).
•
Using the navigation keys (↑ ↑ ↑ ↑ and ↓ ↓ ↓ ↓ ), move the cursor to the value to be marked "value 1" and press the F1 key (1>>).
•
For the second marker, press the F2 key (...) and using the navigation keys (↑ ↑ ↑ ↑ and ↓ ↓ ↓ ↓ ), move the cursor to the value to be marked "value 2" and press
the F1 key (2>>).
In this particular example, the graph will display values included between positions 10 and 20.
•
Press the F2 key twice (...), to reach the GRAPH function, then press F2 to confirm.
Post trigger = 900 measurements
Trigger on programmed value
= 10°C
D
61/61
Publicité
