Publicité
The chosen calibrated sensor is displayed in the measurement screen.
Name of
calibrated sensor
used
D.4
Configuration of default value points
The configuration of default value points is performed in the configuration/Points menu, obviously providing the default values mode has been confirmed.
•
Using the F1 key, select the configuration/Points menu.
•
Confirm using the VAL key.
•
Using the F1 key (
•
Using the navigation keys ( and
•
Using the navigation keys (↑ ↑ ↑ ↑ and ↑ ↑ ↑ ↑ ), increase the value of the selected digit.
•
Confirm the line using the VAL key.
You can edit a value already recorded:
•
Using the navigation keys (↑ ↑ ↑ ↑ and ↑ ↑ ↑ ↑ ), select the line requiring editing.
•
Press the navigation key ( ) to make editing possible.
You can delete a value already recorded:
•
Using the navigation keys (↑ ↑ ↑ ↑ and ↑ ↑ ↑ ↑ ), select the line requiring deleting.
•
Press the
key to delete the line.
Notes:
A maximum of 100 values can be entered.
This table of values is also used for the Synthesiser mode; consequently all changes to this table entail a change to the synthesiser values.
D.5
Storage of acquisitions in progress.
The TC6621 is designed to store 10,000 values in one or more acquisition bursts.
•
Using the F2 key, enter the Mode menu.
•
Select the Memory function.
•
Confirm using the VAL key.
) add a new value line to the table.
), select the digit that requires editing.
D
59/59
Publicité
