TC-TM66xx
U
SING THE INSTRUMENT
nd
2
field
indicating the
Date, time and
battery charge.
rd
3
field
indicating the
configuration by
pictograms
th
6
field
indicating
the min, ave
and max.
measureme
nt values.
The table below provides a definition of each pictogram displayed on the screen:
Symbol
The table below provides a definition of each pictogram of the function keys
Symbol
B.1.5
Operating modes
There are 2 different operating modes:
•
Measurement mode (displayed in mV, Ohm, °C or °F),
•
Simulation mode (value displayed in mV, Ohm, °C or °F).
The functional and electrical characteristics not to be exceeded are described below:
B.1.5.1
Constant voltage measurement
Gauge
Resolution (display)
1 V or 0.01 °C or 0.01°F
Scope of range:
-10 mV to + 100 mV
Scaling
yes
B.1.5.2
Voltage emission
Gauge
1 V or 0.01 °C or 0.01°F
Resolution (display)
-9.5 mV to +80 mV
Scope of range:
yes
Scaling
50/50
Description
Emission mode in increases
Emission mode in single ramp
Emission mode in cyclic ramp
Scaling
On hold
Filtering
%PE function (Full Scale)
Error (over-calibration in measurement or error on the value
emitted...)
Incremental mode using the arrows
Battery life indication
Acquisition in progress (the value on the right of the pictogram
indicates the number of values recorded)
Description
Tab key
Open a drop-down list
Close a drop-down list
Delete the selected item
Clear the selection
Add the item being edited
+100mV
+ 80 mV
st
1
indicating the
operating mode
5
indicating the
value of the
measurement
or the
emission value
(in mV, °C,°F
th
7
field indicating
or %)
the functions of the
F1 and F2 keys.
field
th
4
field indicating the
measurement or
simulation mode, the
gauge and the main
related functions.
th
field