SilverCrest SHBSB 800 A1 Instructions D'utilisation Et Consignes De Sécurité page 26

Avoid making sudden movements when trimming.
Switch the product on by pressing the ON/OFF
button once. To maximize performance, press
3
the ON/OFF button
Turbo display will appear on the display if
8
this is the case.
Note: The turbo function increases the motor
speed to cut thick hair effortlessly.
Switch the product off by pressing the ON/OFF
button once or twice until the product goes off.
3
Activate the travel lock function by long pressing
the ON/OFF button
travel lock display
Deactivate the travel lock function by long press-
ing the ON/OFF button
the product will switch on and the travel lock
display will go off.
9 a
Always trim from the nape in the direction of
the top of the head, or from the forehead and
temples towards the centre of the head.
Guide the product slowly and steadily through
the hair. If possible, trim against the direction of
the hair's growth.
Comb attachment
(mm)
12.0
20.0
30.0
Note: Ensure that you move the product away from
the hairline and slowly push it downwards.
Note: The scissors
18
additional styling.
26 GB/IE
one more time. The
3
3-5 seconds. Then
3
will light up.
9 a
3–5 seconds. Then
3
Trim length
(mm)
3.0
6.0
9.0
supplied may be used for
While doing so, hold the product in such a
way that the selected comb attachment
positioned as level as possible.
Move the product over the head several times
to collect all of the hair. To achieve a straight
line, move the product through the hair several
times from different directions.
Comb the hair repeatedly.
You can graduate the desired trim length of the
comb attachment
ing the lower part of the product
to length position indicator
differ by 0.3 mm.
Example:
Comb attachment 3.0 mm
(trim length 3.8–5 mm):
Furthermost right
position (0.8 mm): short hair (3.8 mm)
Middle
position (1.4 mm): mid-length hair (4.4 mm)
Furthermost left
position (2.0 mm): long hair (5.0 mm)
Trim length with accurate trim adjustment
(mm)
0.8 1.1
3.8 4.1
6.8 7.1
9.8 10.1
12.8 13.1
20.8 21.1
30.8 31.1
Thinning hair
Note: Using this function you can reduce the
volume of the hair by collecting and cutting only
some of it off.
Place the thinning attachment
uct as described in the chapter "Changing the
attachments".
Note: The thinning attachment
every hair from being cut.
more accurately by rotat-
11
according
5
. These gradations
4
1.4 1.7
4.4 4.7
7.4 7.7
10.4 10.7 11.0
13.4 13.7 14.0
21.4 21.7 22.0
31.4 31.7 32.0
onto the prod-
12
prevents
12
is
11
2.0
5.0
8.0