SilverCrest SHBSB 800 A1 Instructions D'utilisation Et Consignes De Sécurité page 22

- if you have not used the
product for a long time,
- during a thunderstorm and
- after each use. When doing
so, remove the plug-in mains
adapter directly from the
7
socket and do not pull it out
using the supply cord.
If the pins of the plug parts are
damaged, the plug-in mains
adapter shall be scrapped.
This product contains batteries
that are non-replaceable.
Avoid risk
of injury
Do not change the accessories
while the product is switched on.
Do not use the product if you de-
tect any kind of visible, external
damage. Never use a damaged
product.
If liquid gets into the product,
check before using the product
once more.
If you notice that the supply cord,
plug-in mains adapter
or another part has become
damaged, the product can no
longer be used.
Repairs should only be carried
out by a specialist. Improper re-
pairs may result in considerable
22 GB/IE
, housing
7
danger to the user. This will also
make any warranty claims void.
Do not use defective attachments
with the product as these could
have sharp corners.
Defective components must always
be replaced with original spare
parts. Only by using original spare
parts can you ensure that safety
requirements are met.
Connect the plug-in mains
adapter to an outlet which is
7
well within reach.
Never use the product unsuper-
vised and only use it in accordance
with the information stated on
the type plate.
Connect the supply cord to the
product before inserting the plug-in
mains adapter
7
The tips of the attachments are
sharp.
Switch off the product before
attaching or switching the at-
tachments, as well as before
cleaning.
Lay the supply cord so nobody
will step on or trip over it.
Do not use the product if you
have an open wound, cut,
sunburn or blister.
into the socket.