Philips sonicare DiamondClear 9000 Serie Mode D'emploi page 8

8
English
Storage and transportation conditions
Electromagnetic fields (EMF)
- Only use original Philips accessories and consumables.
Only use detachable supply unit CBAyyyy, TCAxxxx, or
WAAxxxx.
- Charge only with CBAxxxx (input ratings: 100 - 240V~;
50/60Hz; 1.3W), CBByyyy (input ratings: 100 - 240V~;
50/60Hz; 1.5W), WAAxxxx (input ratings: 100 -
240V~; 50/60Hz; 3.5W), output ratings: 5VDC; 2.5W,
TCAxxxx (input ratings: 100 - 240V~; 50/60Hz; 1.5W).
- Charge and use the product at a temperature
between 0 °C and 40 °C (32°F and 104 °F).
- Keep product and batteries away from fire and do not
expose them to direct sunlight or high temperatures.
- If the product becomes abnormally hot or smelly,
changes color or if charging takes longer than usual,
stop using and charging the product and contact
Philips.
- Do not place products and their batteries in
microwave ovens or on induction cookers.
- Do not open, modify, pierce, damage or dismantle the
product or battery to prevent batteries from heating
up or releasing toxic or hazardous substances. Do not
short-circuit, overcharge or reverse charge batteries.
- If batteries are damaged or leaking, avoid contact
with the skin or eyes. If this occurs, immediately rinse
well with water and seek medical care.
- This appliance contains batteries that are non-
replaceable. When the battery is at end of life, the
appliance shall be properly disposed of, see section on
Recycling.
Temperature -10°C to 60°C (14 °F to 140 °F).
This Philips appliance complies with all applicable
standards and regulations regarding exposure to
electromagnetic fields.