Philips sonicare DiamondClear 9000 Serie Mode D'emploi page 17

Brush Head Replacement Reminder
Brush Head Mode Pairing
Activating or deactivating features
Your Philips Sonicare is equipped with BrushSync
technology that tracks the wear of your brush head.
Note: This feature only works with Philips Sonicare smart
brush heads with BrushSync technology.
1 When you attach a new smart brush head for the first
time, the handle recognizes that you have a Philips
brush head with BrushSync technology and begins
tracking brush head wear.
2 Over time, based on the pressure you apply and the
total time the brush head has been used, the handle
tracks brush head wear in order to determine the
optimal time to replace your brush head. This feature
guarantees the best cleaning and care of your teeth.
3 When the Brush Head Replacement Reminder
indicator lights up amber, you should replace your
brush head.
Note: All smart brush heads come with the brush head
replacement reminder feature activated. To deactivate
the brush head replacement reminder see 'Activating or
deactivating features'.
Brush heads with BrushSync technology are equipped
with a microchip which communicates with the handle
and automatically pairs it with the recommended mode
and intensity.
Note: If you change modes/intensity, the brush head will
remember the last used setting.
You can activate or deactivate the following features of
your toothbrush:
- EasyStart
- Brush Head Replacement Reminder
- Pressure Sensor Feedback
Note: You can only activate or deactivate the Brush Head
Replacement Reminder when a smart brush head is on
the handle.
17
English