SilverCrest SSM 550 D1 Mode D'emploi page 11

To add more food while the appliance is in use, ...
1) Turn the measuring cap
2) Add the ingredients.
3) Afterwards, replace the measuring cap
by turning it clockwise.
Removing the blender
When you have finished processing the foods:
1) Always start by moving the switch
the power plug.
2) Wait until the motor has come to a complete standstill before lifting the blender
straight upwards. You do not need to turn the blender
Useful tips
■ To achieve the best results when puréeing firm ingredients, add small amounts
one after the other into the blender
■ When processing firm ingredients, cut them into small pieces (2–3 cm).
■ When mixing liquid ingredients, start off with a small amount of liquid. Grad-
ually add more liquids to the mixture through the measuring cap.
■ The appliance can be stabilised by placing your hand on top of the closed
blender during operation.
■ When stirring firm or very viscous foods, it can be helpful to use the level Ice
Crush/Clean to avoid a blocking of the cutting blades
NOTE
► Do not use the appliance to grind crystals of cooking salt, refined sugar or
white sugar. For example, to make powdered sugar.
■ 8 │ GB │ IE │ NI
anticlockwise and remove it.
into the lid opening and secure it
to the OFF position and then remove
rather than a single large portion.
as you do so.
.
SSM 550 D1