Publicité
EN
Troubleshooting
Problem
Possible Cause
Solution
Pressure incorrect
Set the correct air pressure according to the Specifications
Air blockage
Check air supply; disassemble and clean Air Tyre Inflator if necessary
Air not blasting when Air Trigger (5) is pulled
Remove rubber hose and remove blockages; check air supply hoses
Hose clogged; hoses damaged or leaking
and connectors and check for damage or leakages. Then have them
repaired or replaced as required
Tool will not stop after the Air Trigger is released
Throttle valve O-ring or valve seat damaged
Have the tool repaired at an authorised Silverline service centre
If the above troubleshooting solutions fail, contact your dealer or an authorised Silverline service centre
8
Publicité
