Proxxon MicroMot 60 Manuel D'utilisation page 15

structions listed below may result in electric
shock, fire and/or serious injury.
c)
the accessory can be attached to your
power tool, it does not assure safe opera-
tion.
d)
Grinding accessories running faster than
their rated speed can break and fly apart.
e)
rectly sized accessories cannot be ade-
quately controlled.
f)
Accessories that do not match
the mounting hardware of the power tool
will run out of balance, vibrate excessively
and may cause loss of control.
g)
If the mandrel is insufficiently held
and/or the overhang of the wheel is too
long, the mounted wheel may become
loose and be ejected at high velocity.
h)
Failure to follow all in-
Just because
Incor-
Damaged ac-
cessories will normally break apart during
this test time.
i)
must be capable of stopping flying debris
generated by various operations. The dust
mask or respirator must be capable of filtrat-
ing particles generated by your operation.
Prolonged exposure to high intensity noise
may cause hearing loss.
j)
Fragments of workpiece or of
a broken accessory may fly away and
cause injury beyond immediate area of op-
eration.
k)
Cutting accessory contacting a "live" wire
may make exposed metal parts of the
power tool "live" and could give the operator
an electric shock.
l)
torque of the motor, as it accelerates to full
speed, can cause the tool to twist.
m)
workpiece allows you to use your hand(s)
to control the tool. Round material such as
dowel rods, pipes or tubing have a ten-
dency to roll while being cut, and may
cause the bit to bind or jump toward you.
n)
If you lose control, the cord
may be cut or snagged and your hand or
The eye protection
The reaction
Clamping a small
- 15 -