Publicité
ENGLISH
AFTER MACHINE USE
1.
After working, before leaving the machine:
•
Lift the main broom with the lever (74).
•
Lift the side brooms with the levers (71) and (72).
•
Turn off the vacuum system with the lever (67) and press the fi lter shaker switch (56) for a short interval, then turn on the
vacuum system again.
•
Empty the hopper (4) (see the procedure in the previous paragraph).
•
Remove the ignition key (68).
•
Engage the parking brake by pressing the pedal (76), then engage the brake lock control lever (69).
WORKING LIGHT ADJUSTMENT
If necessary, adjust the working light beam aiming (9) with the screws (21).
MACHINE LONG INACTIVITY
If the machine is not going to be used for more than 30 days, proceed as follows:
–
Check that the machine storage area is dry and clean.
–
Disconnect the battery connector (25).
FIRST PERIOD OF USE
After the fi rst 8 hours, check the machine fastening and connecting parts for proper tightening and check the visible parts for
integrity and leakage.
18
USER MANUAL
146 1062 000(3)2007-02 A
SR 1300H B
Publicité
