Publicité
ENGLISH
MACHINE OPERATION
1.
Avoid stopping for a long time with the machine in the same position and the brooms turning: this could create unwanted
marks on the fl oor.
2.
To collect light and bulky waste materials, lift the front skirt by pressing the pedal (75); take into consideration that the machine
vacuum capability is reduced when the front skirt is lifted.
WARNING!
When operating on wet grounds, it is essential to turn off the vacuum system with the lever (67) to prevent the
dust fi lter from being damaged.
3.
For machine proper operation, the dust fi lter must be as clean as possible. To clean it while sweeping, proceed as follows:
•
Lift the main broom with the lever (74) to stop the vacuum system.
•
Press the fi lter shaker switch (56) at short intervals.
•
Lower the main broom to restart the vacuum system, and resume operation.
NOTE
While working, repeat the procedure every 10 minutes on average (depending on the dustiness of the area to be
cleaned).
NOTE
This operation can also be performed when the machine is moving.
NOTE
When the dust fi lter is clogged and/or the hopper is full, the machine cannot collect dust and debris anymore.
4.
The hopper (4) should be dumped after each working period and whenever it is full (see the procedure in the next paragraph).
16
USER MANUAL
146 1062 000(3)2007-02 A
SR 1300H B
Publicité
