Publicité
HOPPER EMPTYING
1.
The hopper maximum dumping height is 1,450 mm (see Fig. 2).
2.
To empty it, move the machine close to the dustbin and proceed as follows:
•
Lift the side and main brooms.
•
Turn off the vacuum system with the lever (67).
•
Press the fi lter shaker switch (56).
WARNING!
Always carry out this operation on a level ground to avoid machine unbalance.
WARNING!
When lifting and emptying the hopper (4), engage the parking brake with the pedal (76) and the lever (69).
3.
Keep people away from the machine and from the hopper (4) especially.
4.
Press the enabling switch (51) and the hopper lifting switch (57) at the same time to lift the hopper (A, Fig. 1) up to the desired
position.
5.
Press the enabling switch (51) and the hopper dumping switch (58) at the same time, and discharge all the debris in the
dustbin (A).
WARNING!
The hopper (A, Fig. 1) can be dumped only when lifted at a minimum height of 300 mm.
6.
Press the enabling switch (51) and the hopper dumping switch (58) at the same time to bring the hopper back to horizontal
position.
7.
Press the enabling switch (51) and the hopper lowering switch (57) at the same time to lower the hopper.
WARNING!
The hopper cannot be lowered if it is not brought to horizontal position fi rst.
8.
The machine is ready to start working again.
Figure 1
SR 1300H B
USER MANUAL
S311418
146 1062 000(3)2007-02 A
ENGLISH
Figure 2
17
S311419
Publicité
