PRIXTON BIKE FIT BF150 Mode D'emploi page 13

4. Install the Left and Right Pedals.
Attach the left/right pedal onto corresponding axles (left
pedal with left-hand thread, right pedal with right-hand
thread).
5. Install the Back Handlebar and Seat Cushion.
Loose the nylon nut and washer, place the back handlebar
onto the triangle plate and tighten.
Place the seat cushion onto the plate and tighten by knob.
OPERATING INSTRUCTIONS
3
- +
LOW HIGH
O
TENSION ADJUSTMENT
For tension adjustment, simply use the tension adjustment
knob (18) found beneath the Computer. To increase tension,
turn clockwise (+), to decrease tension, turn anti-clockwise (-).
It sets the lowest magnetic force on the level 1 It sets the
highest magnetic force on the level 8
A
B
C
13
HOW TO ADJUST THE SEAT'S HEIGHT:
A. Loose the knob off.
B. Adjust to the required height.
C. Finally tighten the knob