PRIXTON BIKE FIT BF150 Mode D'emploi page 12

KEYS
1. [E-Enter]:
By pressing this key once, it is possible to specify values step by step in the respective
functions. For this, the desired function must firstly be selected using the [M] key. Holding
the key pressed activates faster running. When training begins, the specified values are
then counted down to zero.
2. [M-Mode]:
Pressing this key once briefly makes it possible to change from one function to another, i.e.
the respective functions can be selected for which entries can be made using the [E] key.
The currently selected function is indicated in the window.
3. [R-Reset]
When this key is pressed briefly, the values chosen with the [M] key are reset to zero. If the
key is held longer (approx. 3 seconds), all last attained values are deleted.
ASSEMBLY INSTRUCTIONS
1. Install the Ball Pin and Knob.
Pull the ball pin out to expand the main frame, and then
insert the ball pin back， attach the knob to the component.
2. Install the Front and Rear Stabilizers.
Loose the screws in the stabilizer, and insert them into the
corresponding grooves and tighten in each stabilizer.
3. Install the Handlebar and Control Panel.
Place the handlebar onto the corresponding grooves in the
main frame, tighten it with bolts and gaskets. Connect the
cords with the corresponding slots, and then place the
control panel onto the main frame and tighten.
12