EUFY RoboVac X8 Hybrid Manuel Du Propriétaire page 9

English
Buttons & Indicators
Turn on / off (Press and hold for 3 seconds)
Start / Paused Cleaning
• Solid blue: standby, cleaning, paused cleaning, returning to
charging base or fully charged
• Solid orange: working in low battery status
• Pulsing orange (when docked to Charging Base): charging
• Flashing red: error
* Refer to the "Troubleshooting > Voice Alert" section in this
manual for solutions.
Returning to Charging Base
• Flashing blue slowly: returning to Charging Base
• Solid blue: standby or paused
Start / Paused Spot Cleaning
• Flashing blue slowly: Spot Mode
• Solid blue: standby or paused
• When you use the Find My Robot function via the EufyHome app, all three
LED indicators are solid blue and a voice prompt is heard.
• To conserve power, the blue light on the buttons becomes dim when:
• RoboVac is not docked to the Charging Base and has been inactive for 10
minutes;
• RoboVac is fully charged for 1 minute.
(Wi-Fi Status Light) Status
Slowly flashing blue Waiting for connection
Rapidly flashing blue Connecting with your wireless router
Solid blue Connected to your wireless router
14 EN
Map Navigation and Management
Navigation
Once Auto cleaning starts, RoboVac moves from the Charging Base, automatically scans
to generate maps, intelligently determines its cleaning route, and divides the space into
zones. The cleaning paths are planned along the walls, following a Z-shaped cleaning
method to complete the cleaning of each zone one by one.
Real-time Mapping & Floor plan
Real-time mapping helps RoboVac to learn the correct cleaning path and the environment
of your home easily. A floor plan will be built after cleaning. The map will be updated in
real-time during each cleaning session to ensure normal navigation.
To create a complete floor plan:
1. Open your doors so that RoboVac can map each room.
2. Remove any objects that may be in the way or that might entangle RoboVac.
Repositioning & Remapping
If the position of RoboVac / Charging Base is adjusted or the surroundings are changed
significantly, RoboVac will try to reposition and remap to match the surroundings.
• If the repositioning is successful, RoboVac will resume cleaning.
• If the repositioning fails, RoboVac will remap to ensure normal navigation with a new
cleaning.
English
EN 15