Publicité
Les langues disponibles
Les langues disponibles
English
• When using for the first time, make sure RoboVac starts cleaning from the
Charging Base.
• During cleaning, do not move RoboVac frequently. If moved, place RoboVac
back to the original position.
Get Started
Important Tips Before Use
a
d
Remove power cords and small objects from the floor that may entangle RoboVac.
Use the supplied cable ties to organize your wires and power cords.
Fold tasseled edges of area rugs underneath to prevent tangling RoboVac. Avoid
cleaning very dark-colored high-pile rugs or rugs thicker than 1.02 in / 26 mm as
they may cause RoboVac to malfunction.
The "No-Go" zones that you set may be ineffective in some cases. It is strongly
recommended to place physical barriers in front of fireplaces and certain areas
(i.e. air vents) that may cause damage to RoboVac if entered.
Keep RoboVac away from wet areas during cleaning..
RoboVac may climb on top of objects less than 0.67 in / 17 mm in height. Remove
these objects if possible.
Anti-drop sensors will prevent RoboVac from tumbling downstairs and steep drops
in most cases. Sensors are less effective if dirty or used on carpeted/reflective/very
dark-colored floors. It is recommended to place physical barriers to block off areas
where RoboVac may fall.
16 EN
c
b
e
f
Preparation
Remove the foam blocks beside the bumper before use.
1
Place the Charging Base on a level surface and against a wall.
2
3
Remove objects within 3 ft / 1 m of the left and right side and within 6 ft / 2 m of
the front of the Charging Base. If you cannot remove the objects, move RoboVac
to a new place and check whether RoboVac can return to the Charging Base
normally; if not, contact eufy customer service for help.
Connect the adapter to the Charging Base and a wall outlet.
4
When the Charging Base connects to AC power, the LED indicator on the
Charging Base is SOLID WHITE.
1
2
English
3
EN 17
Publicité
