EUFY RoboVac X8 Hybrid Manuel Du Propriétaire page 14

English
Zone Cleaning Mode (available via the EufyHome app only)
In this mode, you can set up a cleaning zone in the EufyHome app. RoboVac will clean
the selected zone only.
Select a Suction Power Level
In the EufyHome app, select a suction power level according to your needs:
• Pure（Default）
• Power
• Turbo
• Max
Select BoostIQ™ feature
In the EufyHome app, select the BoostIQ™ feature according to your needs. RoboVac
will automatically increase the suction power if it detects that stronger power is
needed to ensure the best clean. BoostIQ™ is ideal for cleaning thicker carpets and
hard-to-sweep messes, which will reduce the total cleaning time, but increase the
noise level. If the vacuuming noise caused by BoostIQ™ disturbs you, you can disable
this feature.
Use Mopping System
• The mopping mode is only intended for a clean floor without stubborn
stains or liquids. To avoid staining floors, do not use the mopping
function when dust is mixed with liquids such as coffee or ink.
• Mopping System cleans best on smooth hard surfaces and may
not perform so well on uneven tiles, heavily waxed floors or rough
surfaces like slate or brick, which may snag the cleaning pad.
• The mopping mode is not recommended when no one is at home.
• Do not use the mopping mode on a carpeted floor. It is recommended
to set a "No-Mop" zone in the EufyHome app to avoid cleaning the
carpeted area.
1. Before mopping, install the waterproof pad under the Charging Base to protect the floor.
24 EN
2. Wet the mopping cloth and wring it until it does not drip. Insert the cloth along the
bracket slot and stick it firmly.
• Use either the washable mopping cloth or the disposable cloth for mopping.
3. Open the water inlet cover to fill the water, then close the cover.
• Do not use any cleaning solution other than those specified by eufy, as it
may damage RoboVac.
4. Install the water tank into the bottom of RoboVac until a click is heard.
• The mopping mode is only intended for a clean floor without stubborn
stains. To achieve a better mopping effect, it is recommended to clean
the floor with RoboVac three times before installing the mopping
module.
English
EN 25