EUFY RoboVac X8 Hybrid Manuel Du Propriétaire page 16

English
RoboVac Part Cleaning Frequency
Washable After each use
Mopping Cloth
Water Tank -
Filters
Clean the Dust Collector and Filter
Press the dust collector release button to pull the dust collector out.
1
Open and empty the dust collector.
2
Remove the filter.
3
4 Clean the dust collector and filter with the cleaning brush.
28 EN
Replacement Frequency
-
Every 6 months (or when they
become yellow)
Rinse the dust collector and filter thoroughly with water.
5
1
min
Air-dry the dust collector and filter completely before next use. You may use
6
another filter if the original one is not dry.
24h
7 Place the filter back into the dust collector.
8 Push the dust collector back into the main unit.
Clean the Rolling Brush
Pull on the release tabs to unlock the brush guard as shown.
1
Lift the rolling brush to remove.
2
Clean the rolling brush with the cleaning tool.
3
Reinstall the rolling brush by inserting the fixed protruding end first and then
4
clicking into place.
English
EN 29