EUFY RoboVac X8 Hybrid Manuel Du Propriétaire page 12

English
1 Press to start cleaning in Auto cleaning mode.
RoboVac moves around to scan the environment and builds a map
automatically.
Press again to pause cleaning.
2
Press to resume cleaning.
When cleaning is paused, docking RoboVac onto the Charging Base will stop
the cleaning.
If cleaning is paused for 10 minutes, RoboVac automatically stops cleaning and
switches to sleep mode.
Press to stop current cleaning and return to the Charging Base.
3
Before cleaning, tidy cables and cords to avoid power interruption or any
damage caused by pulling the cord during cleaning.
Use Your RoboVac with the EufyHome App
To fully enjoy all the available features, it is recommended to control your RoboVac via
the EufyHome app.
Before you start, make sure that:
• Your smartphone or tablet is running iOS 9.0 (or above) or Android 5.0 (or above).
• The 2.4GHz band wireless signal is enabled on your wireless router.
• The Wi-Fi status light on RoboVac is slowly flashing blue.
• Your smartphone or tablet has enabled Bluetooth to ensure a better connection.
• RoboVac has enough power during setup.
20 EN
EufyHome
1. Download the EufyHome app from the App Store (iOS devices) or Google Play
(Android devices).
2. Open the app and create a user account.
3. Tap the "+" icon to add "RoboVac X8 Hybrid" to your EufyHome account.
4. Follow the instructions in the app to set up the Wi-Fi connection.
After connecting successfully, you can control RoboVac via the app.
With the app, you can select cleaning at your desired suction level, schedule
cleaning, view the cleaning map, set up "No-Go" zones, check the network
connection status, and access additional features.
Wi-Fi Status Light
Slowly flashing blue Waiting for connection
Rapidly flashing blue Connecting with your wireless router
Solid blue Connected with your wireless router
If RoboVac gets stuck in any space, tap Find My Robot in the app to find
the machine. This function is available in the app only.
Reset the Wi-Fi connection
To reset the Wi-Fi connection, press and hold the two buttons (
simultaneously for 5 seconds until you hear a voice prompt. At the same time,
RoboVac will restore the factory default settings.
You will hear a voice prompt when the Wi-Fi connection has been reset, and
the Wi-Fi status light will slowly flash blue. Now you can follow the Wi-Fi
instructions in the eufyHome app to set up the Wi-Fi connection.
English
and )
EN 21